EL.CO. was founded in 1986, in Italy, and obtained a prestigious position in the world of industrial automation parts. EL.CO. products are of the highest European quality that meets the demands of panel builders and electrical/electronic automation projects. The company’s main products include multi-scale and multi-function timers, protection relays, liquid level controllers, under-over-phase sequence-phase failure protection relays, power supplies, temperature controllers and many more.

elco-italy-logo

Liquid Level Control

Liquid-Level-Control

Liquid Level Control

LVE230

  • For all conductive liquid
  • Automatic Resetting
  • From 2,5K to 50K sensitivity adjustable
  • UP or DOWN function
  • 1 change over contact- 8A
liquid-level-control

TIMERS

On Delay timer
  • On Delay timer
  • Compact size- 1 module 17.5 mm
  • Universal Supply 24-75VDC/24-240VAC
  • 1 change over contact- 8A
  • Time Range: 0.1s-10days
10-Function-Timer
  • 10 Function Timer
  • Compact size- 1 module 17.5 mm
  • Universal Supply 24-75VDC/24-240VAC
  • 1 change over contact- 8A
  • Time Range: 0.1s-10days

Phase Protection

phase protection

Three Phase Voltage Relay Un=400 V

VEUM400N

  • Compact size- 1 module 17.5 mm
  • Monitor own supply and detects if one or more phases exceed the set under or over voltage trip levels
  • Measure phase to phase voltage
  • Adjustment for under and over voltage trip level
  • Adjustment for time delay (from under or over voltage condition)
  • Adjustment for time delay (from under or over voltage condition)
  • Neutral loss protection
  • 1 change over contact- 8A

PID and Temperature Controllers

PID & Temperature Controllers

PID/Microprocessor Based Regulators and Temperature Controllers

ELKM3

  • 2 displays, 4 digits each
  • Universal Inputs:
    Thermocouples: J (-50… +1000°C/-58… +1832°F), K (-50… +1370°C/-58… +2498°F), S/R (-50… +1760°C/- 58… +3200°F), T (-70… +400°C/-94… +752°F)
    Infrared sensors: J or K
    RTC: Pt100 3 wires and Pt1000 2 wires (-200… +850°C/-328… +1562°F)
    Thermistors: PTC KTY81-121 (-50… +150°C/-58… +302°F), NTC 103-AT2 (-50… +110°C/-58… +230°F)
    Linear signals:0/12… 60mV, 0/4… 20mA, 0/1… 5V, 0/2…10V
  • Outputs
    OUT1: Relay SPDT 4A/240 VAC or voltage output for driving SSR 13V max. @ 1mA, 10.5 V min. @ 15 mA ±10%
    OUT2 and OUT3: Relay SPST-NO 2A/240 VAC or voltage output for driving SSR 13V max. @ 1mA, 10.5 V min. @ 15 mA ±10%.
    OUT4 programmable: Voltage output for driving SSR 13V max. @ 1mA, 10.5 V min. @ 22 mA ±10% or transmitter power supply or 2nd Digital Input
  • Power Supply: 100-240VAC
  • 4 set Points selectable
  • IP 65
  • Serial communications: TTL (standard) + RS485 (optional), protocol: MODBUS RTU
pid temperature control

PTC/NTC Temperature Controllers

ELZ10

  • 4 digit each
  • Inputs:
    Programmable input for PTC KTY 81-121 (990  at 25°C) or NTC 103AT-2 (10 W at 25°C)
  • Outputs
    1 relay SPST-NO or 1 relay SPDT
    16A-AC1,6A-AC3/250 VAC
  • Power Supply: 100-240VAC
  • IP 65

SWITCHING POWER SUPPLIES

power supply

MAINS SWITCHING POWER SUPPLIES

EDR 30-50-70 SERIES

  • Universal input range (90…264VAC / 125…370VDC)
  • Short circuit , over voltage and over load protection
  • Green LED DC output voltage ( DC OK )
  • Red LED DC low output voltage( DC LOW )
  • DIN rail mounting
  • Compact Size
  • DC Output Voltage: 24VDC
  • Adjustable voltage range
  • Output Current:
    EDR 30: 1.3A
    EDR 50: 2.2A
    EDR 70: 3.0A